Let Us Handle Your HVAC Preventive Maintenance

We work with homeowners throughout the Beckley & Shady Spring, WV areas

You have a strong, well-functioning HVAC system. However, if you don't keep up with HVAC maintenance, that may not last. Precision HVAC Install and Repair, LLC offers semiannual maintenance visits for homeowners in Beckley, Shady Spring, WV and the surrounding area. We'll make sure your unit is ready for the changing seasons and check for any red flags that may require attention.

HVAC preventive maintenance is crucial for every homeowner. Speak with our contractor now to set up an appointment.

A thorough checklist for your inspection

A thorough checklist for your inspection

Your heating and cooling system comes with a lot of moving parts, so it's important to have a technician who is willing to look at your unit in detail. An HVAC preventive maintenance visit from us includes...


Heat Pump Preventative Maintenance Checklist
Indoor & Outdoor Units
  • Inspect and clean air filters (replace if disposable)
  • Check blower motor amps and lubricate bearings if applicable
  • Inspect evaporator and condenser coils for dirt buildup
  • Verify refrigerant charge (superheat/subcooling or by weight)
  • Inspect reversing valve operation and defrost cycle
  • Test crankcase heater (if present)
  • Check electrical connections and tighten as needed
  • Inspect contactor points and capacitor health
  • Clear debris from outdoor coil and ensure proper airflow
  • Inspect condensate drain and pan for clogs or leaks
  • Test thermostat calibration and system response
  • Check ductwork for leaks, insulation, and airflow balance



96% Gas Furnace Preventative Maintenance Checklist
High-Efficiency Condensing Furnace
  • Replace or clean air filter (monthly to quarterly depending on use)
  • Inspect flame sensor and clean with emery cloth
  • Check igniter resistance (typically 40-90 ohms)
  • Inspect burner flame (steady blue, no yellow tipping)
  • Clean condensate trap and verify drain line is clear
  • Inspect PVC venting for slope, blockages, or cracks
  • Check pressure switch tubing and verify proper operation
  • Test inducer motor amps and bearings
  • Inspect heat exchanger for cracks or corrosion
  • Verify gas pressure and manifold settings
  • Check blower wheel for dust buildup and balance
  • Confirm thermostat operation and cycle timing
  • Inspect and test limit switches and rollout sensors

By hiring us for HVAC maintenance every six months, you can reduce the risk of significant problems throughout the year. Call 304-890-6281 today to schedule service for your system.